Try! ABS material 3D printing.

Scoovo C170 specs is not formally supported ABS material.
... But I try printing 3D objects by ABS material.

I got ABS material at Amazon.
   3Dcreators sells materials in Amazon.

Try 1.
   I try same test bed condition that face is masking tape only.

   Result.
      Printed object don't stick on test bed.
      ABS material don't stick masking tape face.

   Measures.
      I use glue(borrow my son, he using school),
      it spread on masking tape face.
      An object stick on test bed steady.

Try 2.
   Slic3r don't change all  slicing parameters when PLA printed.

   Result.
      First layer fixed on test bet. (Try 1. successfully)
      Printed objects are apt to exfoliate between layers
      or exfoliated object cling around the print head.

   Measures.

      Melting temperature up to 230°C.
      (Temperature range, PLA 190-220°C, ABS 200-250°C)
      Layer height down to 0.05mm from 0.1mm.
      (Maker specs says minimum thin is 0.1mm.)
      And the settings don't use "Easy mode", using to "Advance mode".

      Advanced mode can adjust detail of objects making parameters.
         + First layer settings.
            + Temperature 230°C.
            + Height is 0.35mm
         + Other layer
            + Temperature 230°C.
            + Height is 0.05mm

Try 3.
   I'll completely finish an object making!

   Result.
      I decrease layer height by Try 2, so don't cover top face. (;_;)

   Measures.
      Solid layers increase number to five which are bottom and top face layers.

      Added change parameters.
         + Solid layers
            + Top 5
            + Bottom 5

Sample an Object. (Three pointed star)

This three pointed start is made two pats. It only fit isn't use glue.

Navy blue part is ABS material.

White is PLA material.

123D design Data